Hach Conductivity Standard Solution, 1413 µS/cm, KCl, 250mL, LZW9710.99
Mfr Part # LZW9710.99
Product # 703842
Lab Chemicals C
- Cadmium – used to test industrial wastewater for heavy metal contamination.
- Calcium Chloride – helps determine total hardness in water samples.
- Calcium Hardness Standard – provides a reference to calibrate hardness testing instruments.
- Calcium Indicator – identifies calcium ions during titration procedures.
- Calcium Sulfate – used in water hardness analysis as a source of calcium ions.
- Calmagite – reacts with magnesium and calcium to measure total hardness colorimetrically.
- Carbon Dioxide Standard – calibrates sensors for dissolved CO₂ in water.
- Chloride Indicator – highlights the endpoint during chloride titration tests.
- Chloride Standard – calibrates equipment for accurate chloride concentration readings.
- Chloride Titrant – used to quantify chloride ions in water samples.
- Chlorine Dioxide Reagent – measures chlorine dioxide levels for disinfection checks.
- Chlorine, Free and Total – measured to evaluate chlorine-based disinfectant levels.
- Chlorine Standard – ensures proper calibration for free and total chlorine testing.
- Chromium Reagent – detects and quantifies chromium in water samples.
- Chromium, Trivalent, Standard – used for safer trivalent chromium measurements.
- Citrate Buffer – stabilizes pH in various water analysis protocols.
- Citric Acid F Reagent – supports silica testing by complexing interfering ions.
- Citric Acid for Silica – helps remove interference during silica measurements.
- COD Digestion – breaks down organic compounds for chemical oxygen demand testing.
- COD Standard – used for calibrating COD testing systems.
- Cobalt Standard – serves as a reference for cobalt detection in water analysis.
- Copper, Free Reagent – identifies unbound copper ions in water samples.
- Copper Reagent – reacts with copper ions to determine their concentration.
- Copper Standard – provides known copper values for calibration purposes.
- Cyanide Reagent – determines toxic cyanide levels in industrial effluent.
- Cyanuric Acid – tested to maintain proper chlorine stabilization in pools.
- Cyclohexanone – acts as a solvent in certain photometric water tests.
- Chlorine, Free – tested to confirm effective water disinfection.
Free Ground Shipping On Orders Over $1500!*
185 - 196 of 196 Products
Hach Conductivity Standard Solution, 147 µS/cm, KCl, 250mL, LZW9700.99
Mfr Part # LZW9700.99
Product # 703840
Hach COD2 Digestion Vials, LR, Mercury-free, pk/25, 2565025
Mfr Part # 2565025
Product # 701695
Hach Chlorophosphonazo Indicator Solution for ULR Hardness, 500 mL, 2589549
Mfr Part # 2589549
Product # 701716
Hach COD2 Digestion Vials, UHR, Mercury-free, pk/25, 2834325
Mfr Part # 2834325
Product # 701962
Hach Chlorine Standard Solution, 25-30 mg/L as Cl₂, pk/20 - 2 mL PourRite Ampules, 2630020
Mfr Part # 2630020
Product # 701772
Hach COD2 Digestion Vials, HR, Mercury-free, pk/25, 2565125
Mfr Part # 2565125
Product # 701697
Hach CDTA Reagent, 30 mL SCDB, 2589723
Mfr Part # 2589723
Product # 701718
Hach Free Chlorine TNTplus Vial Test, 0.05-2.00 mg/L Cl₂, 24 Tests, TNT866
Mfr Part # TNT866
Product # 700179
Hach COD TNTplus Vial Test, Mercury-Free, HR, 25-1,000 mg/L COD, 25 Tests, TNT825
Mfr Part # TNT825
Product # 700146
Lab Chem Chloride Standard 1000 mg/L, 125 mL
Mfr Part # LC 130007
Product # 707816
Lab Chem Calcium AA Standard, 1000 ppm (1mL = 1mg Ca), 125 mL
Mfr Part # LC 126507
Product # 707806
