Lab Chemicals C
- Cadmium – used to test industrial wastewater for heavy metal contamination.
- Calcium Chloride – helps determine total hardness in water samples.
- Calcium Hardness Standard – provides a reference to calibrate hardness testing instruments.
- Calcium Indicator – identifies calcium ions during titration procedures.
- Calcium Sulfate – used in water hardness analysis as a source of calcium ions.
- Calmagite – reacts with magnesium and calcium to measure total hardness colorimetrically.
- Carbon Dioxide Standard – calibrates sensors for dissolved CO₂ in water.
- Chloride Indicator – highlights the endpoint during chloride titration tests.
- Chloride Standard – calibrates equipment for accurate chloride concentration readings.
- Chloride Titrant – used to quantify chloride ions in water samples.
- Chlorine Dioxide Reagent – measures chlorine dioxide levels for disinfection checks.
- Chlorine, Free and Total – measured to evaluate chlorine-based disinfectant levels.
- Chlorine Standard – ensures proper calibration for free and total chlorine testing.
- Chromium Reagent – detects and quantifies chromium in water samples.
- Chromium, Trivalent, Standard – used for safer trivalent chromium measurements.
- Citrate Buffer – stabilizes pH in various water analysis protocols.
- Citric Acid F Reagent – supports silica testing by complexing interfering ions.
- Citric Acid for Silica – helps remove interference during silica measurements.
- COD Digestion – breaks down organic compounds for chemical oxygen demand testing.
- COD Standard – used for calibrating COD testing systems.
- Cobalt Standard – serves as a reference for cobalt detection in water analysis.
- Copper, Free Reagent – identifies unbound copper ions in water samples.
- Copper Reagent – reacts with copper ions to determine their concentration.
- Copper Standard – provides known copper values for calibration purposes.
- Cyanide Reagent – determines toxic cyanide levels in industrial effluent.
- Cyanuric Acid – tested to maintain proper chlorine stabilization in pools.
- Cyclohexanone – acts as a solvent in certain photometric water tests.
- Chlorine, Free – tested to confirm effective water disinfection.
