Sludge Judge® II - Large Capacity

Description

The Sludge Judge II by Nasco Sampling is made from a 1-1/4 in. (3.18 cm) outside diameter plastic tubing resulting in double the capacity and a very rigid unit when assembled. Designed for sampling 5% or less solids. It holds 6 oz. per foot (178 ml per .31 m) and can be assembled according to the requirements of the job. Add or subtract sections as needed, and the 1-ft. (.31 m) markers on the tubing will help identify the amount of sludge in the tank. The unit is made up of three 5-ft. (1.53 m) sections (top, extension, bottom) or individual sections can be combined as required. The Sludge Judge® II is not autoclavable.

Features

• Accurately measures settleable solids level in slurries that contain less than 5% solids


• Sampler breaks down into three 5-ft. sections for easy transport


• Length can be extended by adding additional 5-ft. middle sections


• Constructed of 3/4 inch tubing holding approximately 3 oz. of sample per foot


• Identify by blue foot markings and black fittings


• Not designed for sampling of ethanol or ethanol blended fuels

Includes

Complete unit includes a top section with rope, extension section and bottom section with valve.

Product Specifications