Sensaphone 800 Monitoring System FGD-0800

Description

The Sensaphone 800 Monitoring System is an easy and low-cost way to monitor a remote facility. The system will monitor up to eight external temperature or dry contact switches. Users program the device to call up to eight phone numbers when the temperature goes too high or low, or when the dry contact type sensor opens or closes. The bulk of the programming is done from a local keypad, but some commands can be programmed via touch tone phone. Users can record custom “Alert Condition” notifications in their own voice that will be played when the device calls out. The system requires an analog phone line and can set off a local alarm if the phone line is cut. When used with a dual set point thermostat, the Sensaphone 800 can also control a thermostat to adjust site temperature between a home or away temperture. Nonvolatile memory retains system settings in the event of power loss. The systems status conditions are obtainable at the unit’s installation site or by calling the device and listening to a report.

Features

• Record custom voice alerts. Receive alarm messages in your own voice.


• Receive voice alerts and alarm notifications over standard phone lines


• Notify up to four people by voice call in the event of an alarm


• Up to four external sensors monitor for temperature, humidity, water, and more


• Included relay output can switch local devices on/off based on alarm activity

Includes

An internal battery backup system provides 24 hours of continuous monitoring and alerts in the event of a power outage, as well as a pre-installed temperature probe to monitor conditions at the installation location.

Product Specifications