Seametrics® Paddlewheel Insertion Flow Sensor, SS, 12"-40", IP210S

$1,143.00 | EA
Product #: 401373
Mfr. Part #: IP210S

Out of Stock - Ships in 5 Days

Description

The Seametrics IP210S -Series flow sensors are Stainless Steel, adjustable depth insertion paddlewheels that fit 12 to 40 pipe. Adapters mate with standard 1-1/2 FNPT threaded fittings such as saddles and weldolets. High-quality jewel bearings and nickelbound tungsten carbide shafts are used for extreme low friction and long life. Ruby bearings and a non-drag Hall-effect sensor give these meters the widest flow range of any paddlewheel on the market. A sensor detects the passage of miniature magnets in the six rotor blades. The resulting square-wave signal can be sent for hundreds of feet over unshielded cable without a transmitter and connected directly to many PLC’s and other controls without any additional electronics. A modular system of electronics can be installed directly on the flow sensor or mounted remotely. The FT430 (externally powered with pulse), FT440 (loop powered), and FT450 (battery powered) all provide digital rate and total displays, as well as a programmable pulse; the FT440 also provides a 4-20 mA analog output.

Features

  • Low-friction, long-life jewel bearings

  • Wide flow range

  • One moving part

  • Use with FT430 or FT440 Monitor/Totalizers

Product Specifications

Sensor Cable Length UOM FT
Input 5V pulse or contact closure
Power 6-36 VDC, <2mA
Fitting Size 1-1/2"
Pressure Max (PSI) 200
Brand Seametrics
Fitting Size Type FNPT
Empty Pipe Detection N
Accuracy 1.5% of full scale
Sensor Cable Length 18
 California residents see Prop 65 WARNINGS