Hach Phosphorus (Reactive and Total) TNTplus Vial Test, LR, 0.15-4.50 mg/L PO₄, 25 Tests, TNT843

Description

Phosphorus TNTplus® chemistry and your Hach spectrophotometer are engineered to simplify water analysis for accurate results, every time. For determination of Reactive (ortho) and Total Phosphorus (phosphate) in wastewater, drinking water, boiler water, surface water and process water. TNTplus® phosphorus reagents can provide an Orthophosphate or Total Phosphorus result. Ascorbic Acid Method is Equivalent to EPA 365.1. Phosphorus TNTplus chemistry allows you to test for reactive or total phosphorus with each vial. Follow the easy to navigate procedure printed on the lid of the box and then insert the TNTplus vial into your Hach spectrophotometer for an immediate result. Measurments are reported in the low range of 0.15 - 4.50 mg/L as PO4. If you are required to digest your phosphorus sample, performing this step in the sealed vial eliminates loss to evaporation and allows up to 30 simultaneous digestions depending on which DRB200 Reactor Block you are using.

Features

• The innovative vial and reagent delivery makes tests easier to use than powder pillows or liquid reagents and significantly reduces spillage or contamination risk.


• The high quality of TNTplus® vials, tight reagent production controls, instrument calibration verification, and high instrument stability all combine to eliminate the need to run reagent blanks—saving you time and money!


• Truecal™ with each vial includes the calibration data for each individual lot, reducing variation in results. This allows you to meet reporting standards and to perform proficiency testing with higher confidence.


• New 2D barcode details batch number and expiry date of reagents, which are documented along with the measurement result. An automatic warning is issued if expiry date has passed. Certificate of Analysis (COA) is available on RFID tag on the box.


• The 2D barcode details batch number and expiry date of reagents, which are documented along with the measurement result. An automatic warning is issued if expiry date has passed. Lot specific information (COA) is available on RFID tag on the box.

Product Specifications